Folie daktyloskopijne
Fingerprint Lifting Tapes – folie daktyloskopijne klejowe
TRANSPAREN T AND FROSTED LIFTING TAPES
Choose the appropriate finish and size of the finest lifting tapes available–Orly by SIRCHIE®. All sizes and finishes are pressure wound, heat treated and “fish-eye” free. After lifting the powdered prints, the tape is easily mounted on rigid vinyl or coated paper backing sheets. 1” tapes are supplied in dust-free plastic bags while 1 1/2” and 2” tapes come in dustfree plastic jars. All sizes are wound on standard 1” cores to fit SIRCHIE lifting tape dispensers (see next page).
144L2 in plastic jar, 144L2, 144L, 144.5L
Cat. no 144.5L, Transparent Lifting Tape, 1” x 360” (2.54cm x 9.1m)
Cat. no 144L, Transparent Lifting Tape, 1 1/2” x 360” (3.81cm x 9.1m)
Cat. no 144L2, Transparent Lifting Tape, 2” x 360” (5.08cm x 9.1m)
Cat. no 145.5L, Frosted Lifting Tape, 1” x 360” (2.54cm x 9.1m)
Cat. no 145L, Frosted Lifting Tape, 1 1/2” x 360” (3.81cm x 9.1m)
Cat. no 145L2, Frosted Lifting Tape, 2” x 360” (5.08cm x 9.1m)
PA LM/CLUSTER FINGERPRINT LIFTING TAPES
As their name implies, palm/cluster fingerprint lifting tapes are designed for lifting developed palm prints or cluster (multiple) fingerprints. The tape is available in transparent or frosted and is pressure-wound and heat-treated to eliminate imperfections and uneven adhesive. Available in two sizes, the tape is individually packaged in resealable plastic bags for dust protection.
144L3, 144L4
Cat. no 144L3, Transparent Palm/Cluster Lifting Tape, 3” x 360” (7.62cm x 9.1m)
Cat. no 144L4, Transparent Palm/Cluster Lifting Tape, 4” x 360” (10.2cm x 9.1m)
Cat. no 145L3, Frosted Palm/Cluster Lifting Tape, 3” x 360” (7.62cm x 9.1m)
Cat. no 145L4, Frosted Palm/Cluster Lifting Tape, 4” x 360” (10.2cm x 9.1m)
SEARCH TRANSPAREN T POLYETHYLENE LIFTING TAPE
This lifting tape is the perfect choice for lifting developed, powdered latent prints from curved or irregular surfaces. Made of strong, elastic, transparent polyethylene, this tape adapts to textured, convex and concave surfaces, and is able to withstand strain without damaging prints. The lifting tape is available in a 1 1/2” width and a 2” width, and is supplied in a dust-free plastic container.
Cat. no 169PPA, Transparent Polyethylene Lifting Tape, 1 1/2” x 360” (3.81cm x 9.1m)
Cat. no 269PPB, Transparent Polyethylene Lifting Tape, 2” x 360” (5.08cm x 9.1m)
SIRCHIE® FINGERPRINT LIFTING TAPE DISPENSERS
Our tape dispensers provide a convenient method for holding, dispensing and cutting a variety of lifting tape sizes. The sharp, high-carbon steel, serrated cutting blades provide a clean cut–every time. Average weight is two ounces. Fabrication: Clear brushed, nickel-plated steel with integral cutting blade to accommodate one inch diameter core size.
Cat. no 145TW, Tape Dispenser for 1” (2.54cm) wide tape
Cat. no 146L, Tape Dispenser for 1 1/2” (3.81cm) wide tape
Cat. no 146TW, Tape Dispenser for 2” (5.08cm) wide tape
Cat. no 147TW, Tape Dispenser for 3” (7.62cm) wide tape
Cat. no 148TW, Tape Dispenser for 4” (10.2cm) wide tape
Rubber-Jell™ LIFTING TAPE
Rubber-Jell™ Lifting Tape is a combination of our fingerprint lifting tape and transparent Rubber/GEL lifter sheets, but on a roll. Rubber-Jell™ Lifting Tape is specially made to conform to most surfaces—smooth, textured, painted, rough, round, and many others. Supplied in a dust-free plastic container with screw lid. Tapes are 0.040 thick and are available in 1 1/2”, 2”, and 4” widths.
Cat. no 144LRJ, Rubber-Jell™ Lifting Tape, Transparent, 1 1/2” x 60” (3.81cm x 1.52m)
Cat. no 144L2RJ, Rubber-Jell™ Lifting Tape, Transparent, 2” x 60” (5.08cm x 1.52m)
Cat. no 144L4RJ, Rubber-Jell™ Lifting Tape, Transparent, 4” x 60” (10.2cm x 1.52m)
SEARCH Fingerprint Hinge Lifters
Since SIRCHIE introduced the hinge lifter in the 1960s, it has become the standard for leading investigative agencies worldwide. The hinge lifter draws its uniqueness from the fact that a special adhesive formulation permits optically clear viewing of latent prints years after lifting.
1 1/2” x 2” HINGE LIFTERS—Sized for single fingerprint lifting.
Cat. no 130LT, Transparent 1 1/2” x 2” (3.81cm x 5.08cm) Hinge Lifter, 24 ea.
Cat. no 130LW, White 1 1/2” x 2” (3.81cm x 5.08cm) Hinge Lifter, 24 ea.
Cat. no 130LB, Black 1 1/2” x 2” (3.81cm x 5.08cm) Hinge Lifter, 24 ea.
2” x 2” HINGE LIFTERS—Sized for single fingerprint lifting.
Cat. no 134LT, Transparent 2” x 2” (5.08cm x 5.08cm) Hinge Lifter, 24 ea.
Cat. no 134LW, White 2” x 2” (5.08cm x 5.08cm) Hinge Lifter, 24 ea.
Cat. no 134LB, Black 2” x 2” (5.08cm x 5.08cm) Hinge Lifter, 24 ea.
2” x 4” HINGE LIFTERS—Sized for multiple fingerprints or partial palm prints.
Cat. no 131LT4, Transparent 4” x 4” (10.2cm x 10.2cm) Hinge Lifter, 12 ea.
Cat. no 131LW4, White 4” x 4” (10.2cm x 10.2cm) Hinge Lifter, 12 ea.
Cat. no 131LB4, Black 4” x 4” (10.2cm x 10.2cm) Hinge Lifter, 12 ea.
POLICE SPECIAL ASSORTMENT—Total of 48 hinge lifters consisting of (24) 1 1/2” x 2”, (12) 2” x 4”, (12) 4” x 4” lifters.
(Available in black, transparent or white.)
Cat. no 132LT, Transparent Police Special Assortment/48
Cat. no 132LW, White Police Special Assortment/48
Cat. no 132LB, Black Police Special Assortment/48
SUPER HINGE LIFTER ASSORTMENT—Total of 96 hinge lifters consisting of 16 ea.-1 1/2” x 2” black, transparent, white; 8 ea.-2” x 4” black, transparent, white; 8 ea.-4” x 4” black, transparent, and white lifters.
Cat. no 133LTWB, Super Hinge Lifter Assortment/96
HINGE LIFTER LABELS—These labels are 1 1/2” x 2” and printed green on crack & peel, pressure sensitive stock. They include a space for: Date Lifted, Lifted By and Location. Sold in packs of 100 each.
Cat. no TLT20C, Hinge Lifter Labels, 100 each
SEARCH WRITE-ON TAB HINGE LIFTERS
This lifter is a pre-assembled device that combines the lifting medium (acrylic adhesive on a .005” clear acetate tab) a backing sheet of clear acetate or opaque vinyl, and a write-on tab at the base of the assembly.
White Black Transparent
Cat. no LP130LB, Black Write-On Tab Lifter, 1 1/2” x 2” (3.81cm x 5.08cm) , 24 ea.
Cat. no LP130LT, Transparent Write-On Tab Lifter, 1 1/2” x 2” (3.81cm x 5.08cm), 24 ea.
Cat. no LP130LW, White Write-On Tab Lifter, 1 1/2” x 2” (3.81cm x 5.08cm), 24 ea.
Cat. no LP131LB, Black Write-On Tab Lifter, 2” x 4” (5.08cm x 10.2cm), 12 ea.
Cat. no LP131LT, Transparent Write-On Tab Lifter, 2” x 4” (5.08cm x 10.2cm), 12 ea.
Cat. no LP131LW, White Write-On Tab Lifter, 2” x 4” (5.08cm x 10.2cm), 12 ea.
Cat. no LP131LB4, Black Write-On Tab Lifter, 4” x 4” (10.2cm x 10.2cm), 12 ea.
Cat. no LP131LT4, Transparent Write-On Tab Lifter, 4” x 4” (10.2cm x 10.2cm), 12 ea.
Cat. no LP131LW4, White Write-On Tab Lifter, 4” x 4” (10.2cm x 10.2cm), 12 ea.
WRITE-ON TAB HINGE LIFTERS, SUPER ASSORTMENT
This assortment of hinge lifters covers most needs. Included are all the popular standard sizes with assorted black, white, and transparent banking covers. Each lifter has a write-on tab as an integral part of the lifter assembly.
LP133LTWB
Cat. no LP133LTWB, Write-On Tab Hinge Lifters, Super Assortment
SEARCH LIFT-O-TABS™
These individual, pre-cut and scored transparent lifters are made of .005” Mylar® that feature a clear adhesive for maximum clarity. Tabs are protected by peel-off covers that are made of polyester and scored for easy removal. Leave the lifter in place on the lifting surface to protect the latent print or peel the lifter off the surface and mount on a backing cover. Each set of Lift-O-Tabs™ comes with TLT20 labels for evidence identification.
1 1/2” x 2” LIFT-O-TABS™. Packaged 24 to a box with 24 covers.
Cat. no TLT01, Transparent 1 1/2” x 2” (3.8cm x 5cm) LIFT-O-TABS™, 24 ea.
Cat. no TLT02, White 1 1/2” x 2” (3.8cm x 5cm) LIFT-O-TABS™, 24 ea.
Cat. no TLT03, Black 1 1/2” x 2” (3.8cm x 5cm) LIFT-O-TABS™, 24 ea.
2” x 4” LIFT-O-TABS™. Packaged 24 to a box with 24 covers.
Cat. no TLT04, Transparent 2” x 4” (5cm x 10cm) LIFT-O-TABS™, 24 ea.
Cat. no TLT05, White 2” x 4” (5cm x 10cm) LIFT-O-TABS, 24 ea.
Cat. no TLT06, Black 2” x 4” (5cm x 10cm) LIFT-O-TABS, 24 ea.
4” x 4” LIFT-O-TABS™. Packaged 12 to a box with 12 covers.
Cat. no TLT07, Transparent 4” x 4” (10cm x 10cm) LIFT-O-TABS™, 12 ea.
Cat. no TLT08, White 4” x 4” (10cm x 10cm) LIFT-O-TABS™, 12 ea.
Cat. no TLT09, Black 4” x 4” (10cm x 10cm) LIFT-O-TABS™, 12 ea.
SEARCH LIFT-O-TABS™ COMBINATION. The SEARCH LIFT-O-TABS™ Combination features an assortment of LIFT-OTABS™ to meet most latent print lifting requirements. The TLT10 combination consists of 108 lifters—see left margin for colors, sizes and quantities.
Cat. no TLT10, SEARCH LIFT-O-TABS™ Combination
SIRCH-LIFT™ TABS. SIRCH-LIFT™ Tabs are LIFT-O-TABS™ on a roll. They feature high-quality fingerprint lifters on a pre-cut and scored roll—packaged in a unique dispenser carton. The carton stores the tabs and dispenses them one at a time. They’re ready to use anytime, anywhere without any backing material to remove . Lifters measure 1 1/2” x 2” (3.8cm x 5cm) and are packaged 100 to a carton.
Cat. no SLT100, SIRCH-LIFT™ Tabs, 100 per roll
Cat. no SLT101, SIRCH-LIFT™ Black and White Backers, 100
SEARCH GRIPLIFTERS™
These lifters are constructed of clear .005” Mylar® and a .002” liner with adhesive in the middle to provide optimum clarity. They are individually cut to size and pre-scored. GripLifters™ feature a preprinted green grip tab that keeps fingerprints off the lift. Simply grip the lifter by the green tab, remove and discard the cover as indicated. Apply and rub the adhesive side on the latent print and lift using the grip tab. After lifting the print, simply place the GripLifter™ on the appropriate size and color backing card.
Cat. no SGL22, 2” x 2” GripLifters™, 100 ea.
Cat. no SGL22B, 2” x 2” GripLifters™ w/plain black backing cards, 100 ea.
Cat. no SGL22BP, 2” x 2” GripLifters™ w/printed black backing cards, 100 ea.
Cat. no SGL22W, 2” x 2” GripLifters™ w/plain white backing cards, 100 ea.
Cat. no SGL22WP, 2” x 2” GripLifters™ w/printed white backing cards, 100 ea.
Cat. no SGL24, 2” x 4” GripLifters™, 100 ea.
Cat. no SGL24B, 2” x 4” GripLifters™ w/plain black backing cards, 100 ea.
Cat. no SGL24BP, 2” x 4” GripLifters™ w/printed black backing cards, 100 ea.
Cat. no SGL24W, 2” x 4” GripLifters™ w/plain white backing cards, 100 ea.
Cat. no SGL24WP, 2” x 4” GripLifters™ w/printed white backing cards, 100 ea.
Cat. no SGL44, 4” x 4” GripLifters™, 100 ea.
Cat. no SGL44B, 4” x 4” GripLifters™ w/plain black backing cards, 100 ea.
Cat. no SGL44BP, 4” x 4” GripLifters™ w/printed black backing cards, 100 ea.
Cat. no SGL44W, 4” x 4” GripLifters™ w/plain white backing cards, 100 ea.
Cat. no SGL44WP, 4” x 4” GripLifters™ w/printed white backing cards, 100 ea.
Cat. no LPW100, 3” x 5” white lifted print backing/sketch/record cards, 100 ea.
Cat. no LPB100, 3” x 5” black lifted print backing/sketch/record cards, 100 ea.
Cat. no LPW1505, 5 1/2” x 8 1/2” white lifted print backing/sketch/record cards, 100 ea.
Cat. no LPB1505, 5 1/2” x 8 1/2” black lifted print backing/sketch/record cards, 100 ea.
Expanded EZ-lifter™ family
SIRCHIE®’s EZ-Lifters™ are a convenient, easy-to-handle means of lifting powdered latent fingerprints from physical evidence at the crime scene or in the crime lab. EZ-Lifters™ feature the same basic raw materials used in our EZ-Lifter™ System (EZL100).
EZ-Lifters™ are fashioned from a pliable vinyl substrate permitting the user to make latent lifts from surfaces from which other lifting materials produce less than satisfactory results. The vinyl substrate is coated with a revolutionary acrylic adhesive that will lift powdered prints but is easily removed from non-porous surfaces and many porous surfaces as well.
Each EZ-Lifter™ is preprinted with a highly accurate horizontal and vertical scale using metric measurements—the format used by most crime laboratories and ID technicians. The lifting surface is supplied on a quickly removed disposable backing material. The lifters are die-cut permitting the user to merely grasp the lower right corner, and then remove the lifter from the backing material.
EZ-Lifters™ are supplied in packs of 12 which include lifters, white winyl backing sheets and ID Labels.
Cat. no EZL4040M, EZ-LIFTERS™ w/Backing Sheets and ID Labels, 1.5”x1.5” (40mm x 40mm), 12 ea.
Cat. no EZL6040M, EZ-LIFTERS™ w/Backing Sheets and ID Labels, 2.375” x 1.5” (60mm x 40mm), 12 ea.
Cat. no EZL6060M, EZ-LIFTERS™ w/Backing Sheets and ID Labels, 2.375” x 2.375” (60mm x 60mm), 12 ea.
Cat. no EZL9060M, EZ-LIFTERS™ w/Backing Sheets and ID Labels, 3.5” x 2.375” (90mm x 60mm), 12 ea.
Cat. no EZL9090M, EZ-LIFTERS™ w/Backing Sheets and ID Labels, 3.5” x 3.5” (90mm x 90mm), 12 ea.
SEARCH Transparent Palm/Cluster Lifters
These 6” x 9” (15.2cm x 22.9cm) lifters are designed to accommodate palm or cluster (multiple) prints that are developed with powder on flat surfaces. The lifters are transparent and pre-assembled—featuring a clear acrylic adhesive on a 5 mil (.005”) thick clear acetate sheet attached to a 10 mil (.010”) thick transparent, black or white vinyl backing sheet. The lifters are packaged twelve (12) to a box. All lifters are marked with a on the viewing side to indicate view side (prevents accidental reversal).
Cat. no 135LT, Transparent Palm/Cluster Lifters w/trans backing, 6” x 9”, 12 ea.
Cat. no 135LB, Transparent Palm/Cluster Lifters w/black backing, 6” x 9”, 12 ea.
Cat no 135LW Transparent Palm/Cluster Lifters w/white backing, 6” x 9”, 12 ea.
Footprint Residue Lifters
These unique lifting devices are coated with supersensitive acrylic adhesive for lifting the most minute particles. Simply remove the adhesive protector, apply to the area, lift and mount on backing material supplied with each lifter. Lifters are 6" x 15" (15.2cm x 38.1cm) and are supplied in a package of twelve (12). Lifters are supplied with twelve 6" x 15" (15.2cm x 38.1cm) transparent, black or white plastic backing sheets 10 mil (.010") thick.
Cat. no FR001, Footprint Residue Lifters w/transparent backing, 6” x 15”, 12 ea.
Cat. no FR001BL, Footprint Residue Lifters w/black backing, 6” x 15”, 12 ea.
Cat no FR001WH Footprint Residue Lifters w/white backing, 6” x 15”, 12 ea.
SEARCH GEL Footprint Lifters
These unique footprint lifters are designed to allow for an accurate transfer of foot or footwear prints from dusty and/or dirty surfaces. They are particularly useful when dealing with lightly covered surfaces because they don’t generate static electricity like standard lifting tapes. Two 6” x 15” GEL footprint lifters—one black and one white.
Cat. no 647C100, GEL Footprint Lifters (1-white, 1-black)
SEARCH Gel Lifters – folie daktyloskopijne żelatynowe
SEARCH GEL Fingerprint Lifters
SEARCH GEL Fingerprint Lifters are among the best available. Used exclusively by some of the major investigation bureaus in the world, these lifters feature an exceptional adhesive face designed to pick up all powder traces from developed prints—without adhering to the lifting surface. This is true even if the surface is porous (such as paper). These lifters are especially useful for lifting developed prints off highly grained surfaces, as well as irregular and curved surfaces. Simply remove the protective, transparent acetate cover, lift the developed print and replace the cover for protection.
Cat. no 126LW, White GEL Fingerprint Lifters, 2” x 2” (5.08cm x 5.08cm), 12 ea.
Cat. no 126LB, Black GEL Fingerprint Lifters, 2” x 2” (5.08cm x 5.08cm), 12 ea.
Cat. no 127LW, White GEL Fingerprint Lifters, 2” x 4” (5.08cm x 10.16cm), 12 ea.
Cat. no 127LB, Black GEL Fingerprint Lifters, 2” x 4” (5.08cm x 10.16cm), 12 ea.
Cat. no 128LW, White GEL Fingerprint Lifters, 3” x 4” (7.62cm x 10.16cm), 12 ea.
Cat. no 128LB, Black GEL Fingerprint Lifters, 3” x 4” (7.62cm x 10.16cm), 12 ea.
Cat. no 129LW, White GEL Fingerprint Lifter, 4” x 10” (10.16cm x 25.4cm), 1 ea.
Cat. no 129LB, Black GEL Fingerprint Lifter, 4” x 10” (10.16cm x 25.4cm), 1 ea.
SEARCH GEL PA LM/CLUSTER LIFTERS
Use this lifter whenever powder-developed palm prints or clusters (multiple prints) need to be lifted from irregular or curved surfaces. The 7” x 9” size is ideal for lifting a full handprint. The lifters are supplied six to a package.
Cat. no 125LW, White GEL Palm/Cluster Lifters, 7” x 9” (17.78cm x 22.86cm), 6 ea.
Cat. no 125LB, Black GEL Palm/Cluster Lifters, 7” x 9” (17.78cm x 22.86cm), 6 ea.
GELifters™
A new solution to an old problem. Most crime scene technicians agree that no single latent print lifting medium serves well in all circumstances.
GELifters™ are offered as an alternative when tape and other lifting medium are not ideal for the situation.
GELifters™ are constructed of high-quality latex and a bonded low-tack adhesive gelatin layer. They’re ideal for lifting dust prints (footwear) and powder-developed latent fingerprints.
GELifters™ are packaged in airtight foil packets and are available in black, white and transparent.
Cat. no GLT101B, Black GELifters™, 5.2” x 7.2” (13.2cm x 18.28cm), 10 ea.
Cat. no GLT101T, Transparent GELifters™, 5.2” x 7.2” (13.2cm x 18.28cm), 10 ea.
Cat. no GLT101W, White GELifters™, 5.2” x 7.2” (13.2cm x 18.28cm), 10 ea.
Cat. no GLT201B, Black GELifters™, 5.2” x 14.4” (13.2cm x 36.58cm), 2 ea.
Cat. no GLT201T, Transparent GELifters™, 5.2” x 14.4” (13.2cm x 36.58cm), 2 ea.
Cat. no GLT201W White GELifters™, 5.2” x 14.4” (13.2cm x 36.58cm), 2 ea.
Cat. no GLT301B, Black GELifters™, 7” x 7” (17.78cm x 17.78cm), 5 ea.
Cat. no GLT301T, Transparent GELifters™, 7” x 7” (17.78cm x 17.78cm), 5 ea.
Cat. no GLT301W, White GELifters™, 7” x 7” (17.78cm x 17.78cm), 5 ea.
Cat. no GLT401B, Black GELifters™, 7.1” x 14.2” (18.03cm x 36.06cm), 2 ea.
Cat. no GLT401T, Transparent GELifters™, 7.1” x 14.2” (18.03cm x 36.06cm), 2 ea.
Cat. no GLT401W, White GELifters™, 7.1” x 14.2” (18.03cm x 36.06cm), 2 ea.